The Most Trusted Wound Therapy Pump On The Market

Woundpro+ - Lightweight wound care device

The WoundPro+ is 50% lighter and 2 ¾ inches shorter than our signature WoundPro device, offering enhance mobility.

Woundpro+ advanced npwt technology

The WoundPro+ incorporates new, enhanced technology, providing distributors with unprecedented visibility into its usage history.

Healing, Simplified.

WoundPro+

A significant advancement in Negative Pressure Wound Therapy (NPWT), the WoundPro+ offers a more compact and lightweight design with an intuitive user interface for easy operation.

Features:
  • Most trusted pump on the market
  • 50% smaller than the WoundPro
  • New, enhanced technology stack
  • Enhanced portability
  • Versatile therapy modes
  • 24-hour+ battery power
  • Made in the USA 🇺🇸
What’s Included:
  • WoundPro+ Control Unit
  • Carrying Case
  • Power Supply with 12’ Cord
  • EZ-Clasp Attachment System
  • 3-year warranty
  • SmartTech for accurate tracking

Easy-to-Use, Intuitive Control Panel

The WoundPro+ features a user-friendly interface for effortless operation, requiring minimal training for healthcare professionals.

WoundPro+ negative pressure wound therapy device

Adjustable Pressure Control

It offers three NPWT therapy settings—continuous, intermittent, and variable—for adaptable and patient-centric care.

Improvements & Comparison of the WoundPro+ System

Wound Vac Pump

Industry Standard
Powerful Pump

Even with it’s compact size, the WoundPro+ maintains it’s powerful flow rate of 8 liters per minute (lpm).

WoundPro+ Control Unit

Automated System Checks And Alarms

Offers alerts for vacuum integrity, suction line obstructions, full canisters, low battery, and standby status, ensuring safety and operational efficiency.
Wound care device battery backup

Equivalent Battery Power With 24-Hour Backup

Battery designed to last 24+ hours on a full charge. Provides continuous operation with no restrictions or power limitations during use.

Device Comparison

50% Smaller Than The WoundPro

The WoundPro+ is significantly more compact at 50% the size of the original WoundPro. This design enhances portability, making it a versatile choice for hospitals, home health, and long-term care facilities.

New, Advanced Technology

The WoundPro+ incorporates new, enhanced software, making it even easier to operate. The cutting-edge technology provides unprecedented visibility into its usage history. Distributors can now access comprehensive data on device utilization, empowering them to make informed decisions and cultivate stronger relationships with healthcare professionals and facilities.

Watch How the WoundPro Works

This video demonstrates how to operate the Pensar Medical WoundPro Negative Pressure Wound Therapy System Control Unit.

Become a
Distributor

Find a
Distributor

Distributor
Resources

Proven To Accelerate Healing Across An Extensive Range of Conditions

The WoundPro+ is a versatile solution with a wide range of applications across various healthcare scenarios, making it a valuable tool for healthcare professionals.

Acute Wound Healing

Benefits surgical incisions, traumatic injuries, and postoperative sites.

surgical wound care

Post-Surgery

Surgical patients recover faster with reduced scarring.

Complex Wounds

Trusted to manage diverse complex wounds, ensuring effective treatment and patient comfort.

Traumatic Wounds

Aids in the healing of traumatic wounds, resulting in improved cosmetic outcomes.

Chronic Wounds

Patients with chronic conditions, like diabetic ulcers and pressure sores, experience improved wound closure.

Cosmetic Benefits

Reduces scar visibility, enhancing cosmetic results.

WoundPro+ FAQs

Frequently Asked Questions

How does the WoundPro+ differ from the original WoundPro?

The WoundPro+ is 50% lighter than the original WoundPro, making it more ergonomic and easier to carry between care settings. It is also shorter (5¾" vs. 8½" tall) and uses a new technology stack for improved performance, accuracy, and reliability. The WoundPro+ uses 300 cc canisters, while the WoundPro works with 300 cc or 800 cc canisters. Both deliver 8 L/min of suction flow and pressure up to -200 mmHg.

Who is the WoundPro+ designed for?

The WoundPro+ is the newest and smallest of Pensar's traditional NPWT pumps. Its portability suits more active patients, and it is well matched to acute care rehab, skilled nursing facilities, and home care. Despite its smaller size, it delivers continuous, intermittent, and variable intermittent therapy with a 300 cc canister and a full set of safety alarms, so it can still treat large wounds.

Watch the video: Introduction to WoundPro+

What is included with the WoundPro and WoundPro+ systems?

Each system includes:

  • Control unit
  • Carrying case
  • Power supply with 12' cord
  • EZ-Clasp attachment system

Dressing kits and collection canisters are sold separately.

How do I turn on the WoundPro or WoundPro+ and start therapy?
  1. Press and hold the green power button until the screen lights up. The unit runs a quick diagnostic check.
  2. The unit opens in standby mode: the operating circle in the center is not moving and "Standby" shows in a blue bar at the top left.
  3. Check the settings. The last pressure used shows at the top right, and the therapy mode (continuous or intermittent) shows on the left.
  4. If the settings match the order, press the power button again to start therapy.

To pause therapy, press the green button. To turn the unit off, press and hold the green button for approximately 3 seconds. The WoundPro and WoundPro+ share the same interface, with large, bold buttons that are easy to use in low light.

Watch the video: Introduction to WoundPro+

How do I set intermittent or variable intermittent therapy on the WoundPro or WoundPro+?
  1. Settings can only be changed in standby mode. If therapy is running, press the power button to switch to standby.
  2. Open the menu: press the green power button, then press and hold the blue button and release.
  3. The current mode blinks. Use the arrows to move between continuous and intermittent, then select.
  4. For intermittent or variable intermittent therapy, set the low pressure and its time, then the high pressure and its time, pressing Menu to confirm each one. For example, -100 mmHg for 20 minutes and -125 mmHg for 10 minutes.
  5. Review the settings, then press the green button to lock them in. The unit returns to standby so you can double-check.
  6. Press the green button again to start therapy.

Intermittent therapy typically cycles between a set pressure and zero, as ordered by the physician. Variable intermittent therapy lets you customize both pressures and times.

Watch the video: Introduction to WoundPro+

How long does the WoundPro and WoundPro+ battery last?

The battery lasts at least 24 hours on a full charge, and the unit can also run while plugged in. A full charge takes approximately 5.5 hours.

What alarms do the WoundPro and WoundPro+ have?
  • Vacuum leak alarm: alerts you to a leak that may affect therapy delivery.
  • Suction line blocked alarm: alerts you to a blockage in the suction line.
  • Canister full alarm: signals that the canister needs to be changed.
  • Low battery alarm: signals that the battery needs recharging.
  • Standby alarm: alerts you when the system is not in active therapy mode.

See the User's Manual for more information about alarms.

How do I clean the WoundPro and WoundPro+ control units?

See the WoundPro or WoundPro+ User's Manual for cleaning instructions.

Have another question? We have answers to 160+ more.

Explore Our Other Products

Simple one-button operation, reducing the technology learning curve for healthcare professionals and wound care needs

MicroDoc®

A discreet, portable single-use NPWT system.

WoundPro®

A powerful NPWT system for accelerated wound healing.

Advanced Wound Care Supplies to enhance wound bed healing

Supplies & Accessories

Our WoundPro accessories and advanced kits elevate NPWT efficiency.

Contact Us

Ready To Elevate Your Healthcare Solutions With Pensar Medical?

Contact us if you’re interested in becoming a distributor or looking for more information on distributors in your area.